View MP4021_223040.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MP4021
TOSHIBA Power Transistor Module Silicon NPN Epitaxial Type (Four Darlington Power Transistors in One)
MP4021
High Power Switching Applications Hammer Drive, Pulse Motor Drive and Inductive Load Switching
Industrial Applications Unit: mm
* * * * *
Small package by full molding (SIP 10 pins) High collector power dissipation (4-device operation) : PT = 4 W (Ta = 25C) High collector current: IC (DC) = 2 A (max) High DC current gain: hFE = 2000 (min) (VCE = 2 V, IC = 1 A) Zener diode included between collector and base.
Maximum Ratings (Ta = 25C)
Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Continuous base current Collector power dissipation (1-device operation) Collector power dissipation (4-device operation) Junction temperature Storage temperature range DC Pulse Symbol VCBO VCEO VEBO IC ICP IB PC Rating 85 100 15 8 2 3 0.5 2.0 Unit V V V A A W
JEDEC JEITA TOSHIBA
2-25A1A
Weight: 2.1 g (typ.)
PT Tj Tstg
4.0 150 -55 to 150
W C C
Array Configuration
3 4 5 6 7 8 9
2 1 R1 R2
10 R1 5 k, R2 300
1
2004-07-01
MP4021
Thermal Characteristics
Characteristics Thermal resistance from junction to ambient (4-device operation, Ta = 25C) Maximum lead temperature for soldering purposes (3.2 mm from case for 10 s) TL 260 C Symbol Max Unit
Rth (j-a)
31.3
C/W
Electrical Characteristics (Ta = 25C)
Characteristics Collector cut-off current Collector cut-off current Emitter cut-off current Collector- emitter breakdown voltage DC current gain Saturation voltage Collector-emitter Base-emitter Symbol ICBO ICEO IEBO V (BR) CEO hFE VCE (sat) VBE (sat) fT Cob ton Input Switching time Storage time tstg IB1 20 s Test Condition VCB = 80 V, IE = 0 A VCE = 80 V, IB = 0 A VEB = 8 V, IC = 0 A IC = 10 mA, IE = 0 A VCE = 2 V, IC = 1 A IC = 1 A, IB = 1 mA IC = 1 A, IB = 1 mA VCE = 2 V, IC = 0.5 A VCB = 10 V, IE = 0 A, f = 1 MHz Output 30 Min 0.8 85 2000 Typ. 100 100 20 0.45 Max 10 10 4.0 115 1.5 2.0 Unit A A mA V V MHz pF
Transition frequency Collector output capacitance Turn-on time
IB1 IB2
2.0
s
Fall time
tf IB1 = -IB2 = 1 mA, duty cycle 1%
IB2
VCC = 30 V 0.4
Marking
MP4021
JAPAN
Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish.
2
2004-07-01
MP4021
IC - VCE
4 Common emitter Ta = 25C 3 1 0.5 0.5 4
IC - VBE
Common emitter VCE = 2 V
IC (A)
IC (A) Collector current
3
3
Collector current
2
0.3 0.2
2
1
IB = 0.13 mA
1 Ta = 100C 25 -55
0 0
2
4
6
8
10
0 0
0.8
1.6
2.4
3.2
4.0
Collector-emitter voltage
VCE
(V)
Base-emitter voltage
VBE
(V)
hFE - IC
10000 5000 3.0
VCE - IB
(V)
Common emitter 2.5 Ta = 25C
Common emitter VCE = 2 V
hFE
3000 Ta = 100C 1000 500 300 25 -55
VCE Collector-emitter voltage
2.0 2.5 1.5 1.0 0.5 0.1 0.5 1.0 2.0
DC current gain
1.5
IC = 3.0 A
0 0.03 0.05
)
0.1 0.3 0.5 1 3 5 0 0.03
0.1
0.3
1
3
10
30
100
300
1000
Collector current IC (A)
Base current
IB (mA)
VCE (sat) - IC
10 10 IC/IB = 500
VBE (sat) - IC
Base-emitter saturation voltage VBE (sat) (V)
Common emitter Common emitter 5 3 Ta = -55C 25 100 IC/IB = 500
Collector-emitter saturation voltage VCE (sat) (V)
5 3
1
Ta = -55C 25
1
0.5 0.3 0.1
100
0.5 0.3 0.1
0.3
0.5
1
3
5
10
0.3
0.5
1
3
5
10
Collector current IC (A)
Collector current
IC (A)
3
2004-07-01
MP4021
rth - tw
300
(C/W)
Curves should be applied in thermal 100 limited area. (Single nonrepetitive pulse) The figure shows thermal resistance per device versus pulse width. (1)
(4)
rth
Transient thermal resistance
30
(3) (2)
10
3
-No heat sink/Attached on a circuit board(1) 1-device operation (2) 2-device operation (3) 3-device operation (4) 4-device operation 0.01 0.1 1 10 Circuit board 100 1000
1
0.3 0.001
Pulse width
tw
(s)
Safe Operating Area
10 8
PT - Ta
(1) 1-device operation (2) 2-device operation (3) 3-device operation 6 (4) 4-device operation Attached on a circuit board
3
IC max (pulsed)* 100 s* 1 ms*
1
Total power dissipation
IC (A)
PT
(W)
4
(4) (3) (2) Circuit board
Collector current
0.3
2 (1)
0.1 0 0 0.03 *: Single nonrepetitive pulse Ta = 25C Curves must be derated linearly with increase in temperature. 0.01 1 3 10 30 VCEO max 100 300 40 80 120 160 200
Ambient temperature
Ta
(C)
Collector-emitter voltage
VCE
(V)
Tj - PT
160
(C)
Tj
(1) 120
(2)
(3)
(4)
Junction temperature increase
80 Circuit board Attached on a circuit board 40 (1) 1-device operation (2) 2-device operation (3) 3-device operation (4) 4-device operation 0 0 1 2 3 4 5
Total power dissipation
PT
(W)
4
2004-07-01
MP4021
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
030619EAA
* The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations.
5
2004-07-01

▲Up To Search▲

Price & Availability of MP4021

	To Download MP4021 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .